(Burbank, California--October 30, 2013) Superheroes are conceived for the realm of myth and might. This is especially true for the masked character Dr. Obsidian, a comic-book hero created by Mark Kochinski in hopes of captivating movie audiences.
Shot in a variety of styles—from film noir to psychedelic sixties to high-def—the forthcoming movie Lost Hero: The Search for Dr. Obsidian
includes numerous CG shots created with LightWave 3D software.
The plot to the film, which Kochinski is creating, directing, producing, and writing, is that the character’s popularity got its start in the late 1930s. Production for a sequel began immediately overseas, but a ship carrying the film seemingly was lost at sea as war broke out. Afterward, financial issues prevented Brazen Pictures from re-establishing the character. With the introduction of television, Brazen planned to resurrect the property some year later, only to have the plans thwarted by scandal involving one of the actresses. A campy, psychedelic version almost made it to television during the 1960s. Then, during the comic-book craze in the 1990s, the property was optioned and now appears ready for a near-future return to the silver screen, this time under the direction of a big-name VFX master and a team of CGI Jedis.
By harnessing the power of LightWave 3D – Kochinski is making his Dr. Obsidian dream a reality. “We had to crank out the effects at a high rate of speed and at minimum expense, and LightWave enabled us to do that,” he says. So when it came time to create Dr. Obsidian’s backstory – and the premise of the film – there was no question that LightWave would play a major role in the production.”
A Matter of Style
According to the filmmaker, it was crucial to have the film reflect the period it is supposed to have been shot in. Because a large part of Dr. Obsidian uses the 1930s back-and-white style, the film has to appear aged and broken down. This includes many greenscreen sequences in which the actors had to be inserted into CG sets built in LightWave or, occasionally, into photographs of old sets and locations.
A large portion of the action was filmed against greenscreen, so virtual sets were important, many of which were created within LightWave. One of the first and the biggest CG backdrops is the interior of a zeppelin, which serves as the villain’s command center. In all, approximately 30 to 40 percent of the imagery is, or will be, CG.
For constructing the buildings, sets, and “futuristic” weapons and aircraft in Dr. Obsidian, Kochinski used the LightWave Modeler. “Modeling in LightWave has always been superb,” he says. “I have been building spaceships for Star Trek to Babylon 5, and now for Dr. Obsidian, in LightWave. The rendering out of the box is excellent, especially if you know how to use it properly. It is a very powerful tool. You can get really fantastic photoreal effects.”
According to Kochinski, there are many features in LightWave that have always kept the software in the forefront of Hollywood content creation. “It is a tremendous piece of software,” he says, “and if a good artist is using it, a lot of work can be done in a fraction of the time it seems to take with other software pipelines.”
Kochinski likes LightWave’s intuitive interface and the fact that everything is logical and where it should be. “It’s a hard thing to explain when you have worked with the software for as long as I have, but it is organized in a way that makes sense. The fact that the buttons have what they do written on them, as opposed to a funky little picture that you have to take time to figure out what it means, saves a lot of time,” he adds.
The filmmaker also likes that Modeling and Layout are separate sections, especially because it coincides with his workflow. When starting a project, Kochinski skips the sketch-design process and dives straight into modeling in LightWave. “The pipeline supports this. I design in 3D to see what works and what doesn’t, so I design and build simultaneously,” he adds.
One of Kochinski’s favorite features within LightWave is the Edge Bevel tool. “Adding beveling properly adds a lot of realism to what you are doing,” he says, noting that the Cloning tool also works well for the art-deco look of the sequences in Dr. Obsidian. “I am doing a lot of beveling and cloning, and repeating of geometric shapes, adding hierarchies to get the effects I need.”
Most of the digitally enhanced sequences are from the 1930s scenes, so Kochinski used bump maps for the textures. “They are almost all procedural textures at this point,” he says. “We are talking about flat, painted surfaces that are shades of gray. So when we do photorealistic renders [inside LightWave], they tend to look pretty good.”
Even though LightWave offers a virtual camera, Kochinski is incorporating subtle camera moves into the production, mimicking those used in the 1930s. He is also mimicking the period’s classical stage lighting within LightWave by using three-point lighting, backfill, and key lighting. He uses the Radiosity tool quite a bit, at times using an HDR image map to start out. For more of a studio look, he will use a few dome lights and Monte Carlo radiosity to get bouncy shadows and lights, which “usually generates a nice three-dimensional-looking render.” For interiors, dome lights are preferred; for exterior shots, aerial lights.
“The renderer is fantastic,” says Kochinski of the feature in LightWave. “When set up properly, you get really wonderful, photorealistic effects.” LightWave’s unique Viewport Preview Renderer (VPR) interactive renderer enables him to experiment with lighting, textures, volumetrics, and shading right in the LightWave viewport and get immediate feedback, thus saving valuable time. “There isn’t anything quite like it, and I use it a lot with the work I am doing,” he says.
Kochinski is currently working in LightWave 11 on a dual-boot Power Mac; he plans to migrate to LightWave 11.6 to take advantage of new features like support for 3D printing, the ability to create or use existing CgFX shaders, Spline Control, a surface-baker camera, stereoscopic review capabilities, Raycasting technology to make an object aware of its surroundings in an animation, and more.
In his spare time, Kochinski has spent more than six years working on Dr. Obsidian with approximately 15 volunteers. Now, he is pulling together enough footage to raise the $50,000 on Kickstarter that’s needed to complete the project, which is expected to take place in a few short months. Follow the progress at http://www.doctorobsidian.com
For more information about LightWave 11.6 or the LightWave 3D Group, please visit: http://www.lightwave3d.com, Twitter, YouTube
, or connect on Facebook
NewTek is transforming the way people create network-style television content and share it with the world. From sporting events, Web-based talk shows, live entertainment, classrooms, and corporate communications—to virtually any venue where people want to capture and publish live video, we give our customers the power to grow their audiences, brands and businesses, faster than ever before.
NewTek is privately owned and based in San Antonio, Texas. For more information on NewTek please visit: http://www.newtek.com, Twitter, YouTube
or connect with us on Facebook
- LightWave 3D is a registered trademark of NewTek.
- NewTek, TriCaster, 3Play and LightWave are trademarks of NewTek.
- All other products or brand names mentioned are trademarks or registered trademarks of their respective holders.